Saturday, October 18, 2014

"Repose" - Stages in a Work of Art

In August I posted an informal picture of a commission, delivered to my brother, of a face I've titled "Repose," which has now been installed in its final location. I took pictures during the many stages of its creation - the first time I've done such an involved recording of the process - and I was amazed at how it changed over the two months that I worked on it. Taking regular pictures also gave me a chance to step back and see the work differently from so close on the work table, so I was able to make adjustments as I went along. Even though you've already seen the final outcome, I thought you might be interested in how it came about. 

-1-
It started as an oval piece of plywood (image 1, right), with a scrunched-up piece of tinfoil where the nose goes. I used that plaster gauze material which comes in a long strip (you dip it in water so it becomes sticky and pliable) to start forming the high points of the forehead, cheeks and chin. What you see in the second image is actually a third layer, where I've started using a cement-like material - it's like mortar only much finer - to form the mouth, brows and nostrils. It's called Winterstone, and I get it from a sculpting supply site called The Compleat Sculptor.
-2-

Here (image 2) I've added more refinement to the face and glued the oval piece of plywood to a larger rectangle which will be the backing to the entire piece as well as a sort of built-in frame.
-3-

The next image (3) shows the face surrounded by all the materials I'll use to define and decorate the face: The material just to the lower right is a piece of 2-inch sections of honey onyx tiles - the same material that my brother and his wife used in their bathroom; I got some of that in order to match the colors in glass. I've got four colors of stained glass arranged at the top of the image coordinated to the onyx; and at the left are various odds and ends such as gems, shells, and glass beads and tiles, all in similar colors.

I started setting the darker areas of glass first (4), but later (5) removed areas in the cheek to show more contrast. I also didn't like the hard line around the edge of the face and above the upper lip (in the photo it looked like a mustache, so by #6 you can see I changed the mouth!).  In every work there is at least one area that I have to scrape off and redo. In this one I also later changed the upper right treatment above the forehead before I finished. Taking photos also alerted me to the fact that the cheeks were a bit too rounded-looking, so I added more hollowness by darkening the glass pieces at the lower left and right - you can see those changes in images 7 and 8.   

I had to make many decisions about the border pieces, and the photos helped immensely with those in terms of balance and weight. I found myself taking a photo every time I arranged a few beads or tiles and checking the layout in the viewfinder.  There were many test shots between image 8 and 9, and the final result, shown in the last image.

-4-

-5-

-6-

-7-

-8-













-9-
"Repose"

1 comment:

  1. I found the stages of Repose fascinating to follow. You sound excited about working with camera feedback; it's nice that it is so helpful to you.

    ReplyDelete